Grooved Pipe Eccentric Reducer

The eccentric reducer maintains a flat bottom or top alignment when reducing pipe sizes, critical in pump suction lines and drainage systems where air pockets must be avoided.

Key Features & Advantages

Eccentric (flat top or bottom) design
Prevents air pockets in pump suction
Grooved ends
Ductile iron

Technical Specifications

Nominal Size (mm/in)	Pipe O.D (mm/in)	L (mm)	Working Pressure (psi)

Dimension Data

Grooved Eccentric Reducer (XGQT072) — DN100–250

Nominal Size (mm/in)	Pipe O.D (mm/in)	L (mm)	Working Pressure (psi)
100×80 / 4×3	114.3×88.9 / 4.5×3.5	80	300
125×100 / 5×4	139.7×114.3 / 5.5×4.5	102	300
150×100 / 6×4	165.1×114.3 / 6.5×4.5	102	300
150×125 / 6×5	165.1×139.7 / 6.5×5.5	102	300
200×100 / 8×4	219.1×114.3 / 8.625×4.5	127	300
200×150 / 8×6	219.1×165.1 / 8.625×6.5	127	300
250×150 / 10×6	273×165.1 / 10.75×6.5	152	300
250×200 / 10×8	273×219.1 / 10.75×8.625	152	300

Threaded Eccentric Reducer (XGQT071) — DN100–200

Nominal Size (mm/in)	Pipe O.D (mm/in)	L (mm)	Working Pressure (psi)
100×65 / 4×2½	114.3×76.1 / 4.5×3	80	230
150×65 / 6×2½	165.1×76.1 / 6.5×3	102	230
200×65 / 8×2½	219.1×76.1 / 8.625×3	127	230